HomeMy WebLinkAbout(545) Concrete Roadway RepairEXISTING INTEGRAL
CURB AND GUmR
EXISTING
JOINTS
SCENARIO 1 -QUARTER PANEL PATCH
LATITUDINAL CENTER
OF PANEL
REMOVE AND REPLACE CONCRETE@
EXISTING INTEGRAL
CURB AND GUmR
LATITUDINAL CENTER
OF PANEL
EXISTING
JOINTS
SCENARIO 2 -HALF PANEL PATCH
LONGITUDINA
CENTER OF
PANEL
REMOVE AND REPLACE CONCRETE
SCENARIO 3 -FULL PANEL PATCH
EXISTING INTEGRAL
CURB AND GUmR
N.QIES:.
LONGITUDINA
CENTER OF
PANEL
G) THE DETAILS OF THIS PLATE SHALL APPLY TO ANY CONCRETE ROADWAY.
@ ORIGINAL EXCAVATION SHALL BE REPAIRED PER EDINA STANDARD PLATE 540.
@ EDGES OF REPAIR SHALL BE SAWCUT CLEAN THE FULL DEPTH OF EXISTING CONCRETE.
II SAWCUT EXISTING
I ....----PANEL OUTSIDE
I OF REPAIR 2"
I DEEP
I
TOOLED JOINT
2" DEEP TO MATCH
SAWCUTTING
@ 12" #4 EPOXY-COATED BAR SHALL BE INSTALL EVERY 18" ON ALL ADJOINING SIDES OF PATCH, EMBEDDED 6" IN EXISTING PANELS.
@ CONCRETE SHALL CONFORM TO MnDOT SPEC. 2301, 2461, AND 2531. WHEN APPLICABLE, INTEGRAL CURB AND GUmR SHALL MATCH
EXISTING STYLE.
@ INSPECTION AND ACCEPTANCE OF REPAIR BY CITY ENGINEER REQUIRED.
CITY OF EDINA
ENGINEERING
& PUBLIC
WORKS
DEPTS.
CONCRETE ROADWAY REPAIR
APPROVED: CITY ENGINEER
REVISED:
01-17
STANDARD
PLATE
545